Absima 1:10 EP Touring/Rally Car ATC3.4V2 4WD RTR - AB12221V2

The success story continues! We've equipped the ATC3.4 "V2" with some new features that take the vehicle to the next level.


The chassis comes with two sets of wheels! One set of chrome-colored on-road wheels for smooth surfaces like asphalt, and one set of slightly larger white rally wheels for loose surfaces like sand and gravel.


NEW* 80A brushed speed controller with T-connector and 540 15T motor
NEW* Programmable speed controller
NEW* 6kg steering servo
NEW* Rally body design
NEW* 2 wheel sets included - On-road and Rally



The new 80A brushed speed controller is waterproof, programmable, and pre-configured with a T-connector. To fully utilize the vehicle's potential, we recommend using a 2S LiPo battery. Additionally, a separately available programming card (item 2110061) can be used to configure various parameters such as braking force, punch, low-voltage protection, and much more.

The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Thanks to the higher performance of the speed controller and the use of T-connectors, any 2S LiPo battery can be used – regardless of C-rate and capacity.


Four oil-pressure shock absorbers provide ideal handling, making driving a lot of fun. Choosing the street tires allows you to perform hot drifts on smooth surfaces, while the grooved tread of the rally tires provides traction on almost any surface. A 6 kg servo takes care of the steering commands.


A lightweight and compact design, as well as a comfortable and ergonomic shape – these are just two of the features of our CR4S 4-channel remote control. Of course, all trim, reverse, and dual rate functions are accessible in the cockpit, allowing adjustments to be made easily using levers and knobs. Furthermore, the remote control features a "beginner mode" (speed reduction by 50%), making it ideal for beginners.


4WD all-wheel drive
2.4 GHz 4-channel radio system
80A brushed speed controller with T-connector
540 15T engine with 32,000 rpm @ 7.4V
6kg steering servo (25T, ball bearing)
4 oil shock absorbers
Ball bearing main drive
Extremely durable plastic parts made of composite material
Steel differential outputs
Aluminum main drive shaft with steel mounts
Adjustable upper tie rods
5mm aluminum motor mount
6mm damper towers
2 differentials (front/rear)
Stylish touring car body
"Light-Weight" chassis (less weight - longer driving time)
Many aluminum tuning parts available

Scale 1:10
Dimensions (L/W/H): 470x200x150 mm
Weight: 1400g
Wheelbase: 260mm
Ground clearance: approx. 15mm
Track width: 170mm front/rear
On-road wheels front/rear: 65mm / width: 26mm
Rally wheels front/rear: 70mm / width: 26mm
Shock absorber oil: 400CPS
Installation length of the shock absorbers: 60mm
Internal gear ratio: Bevel pinion: 13T / Ring gear: 38T
Motor gear ratio: Pinion: 26Z / Main gear: 58Z (module 0.6)

Inside the Box:
ATC3.4V2 On-Road/Rally RC Car RTR
2.4 GHz CR4S remote control
Plastic clips for shock absorbers
Sticker sheet
Operating instructions

Not included:
4x AA batteries for remote control
7.2V NiMH or 7.4V* LiPo driving battery (*recommended)
Charger (suitable for the drive battery)
Programming card for individual settings of the speed controller